Click on the image to check the artwork
The winding equipment is widely used in the winding of permalloy core. This equipment is suitable for winding circular, square, C-shaped, rectangular and other permalloy cores. The whole process of machine production is controlled by computer, and the whole process of feeding, bucking, topping, winding, cutting and welding is monitored in a closed-loop way, which is fast, efficient, stable and does not require special personnel to watch.
Technical parameters | ||
Function |
Suitable for winding circular, square, C-shaped, rectangular and other permalloy cores |
|
Model |
HYC20-50 |
HYC50-100 |
Die diameter |
6-45mm |
10-80mm |
Maximum outer diameter of winding |
50mm |
100mm |
Width of permalloy |
5-20mm |
10-50mm |
Thickness of permalloy |
0.15-0.35mm |
0.2-0.6mm |
Alignment accuracy of both sides of permalloy core |
＜0.1mm |
＜0.2mm |
power supply |
AV220V 50/60HZ |
|
Air Pressure |
8kgf/cm |
|
Machine weight |
About 650kg |
|
Remarks |
Those not in the above scope can be customized according to customer requirements |
|
http://www.mienrain.com/